Ever bothered by the continuous scale formations that clog the pool filtration system and also leaves a disgusting look on your pool water? This effect is caused by the improper balancing of calcium hardness on the pool water. That is why pool water chemistry should always be given importance whenever we replace the water in our pool to make sure that we wonít encounter any pool water related problems in the future.
With regards to the importance of calcium as an important element used on maintaining the quality of pool water, it should always be confined to its right amount. The suitable level for calcium hardness on pool water should at least fit around 150 to 250 ppm although a slight variation would not hurt the bathers or the pool.
Magnetic water conditioners are pool equipments designed to prevent the formation of calcium scale that causes irritations to the skin and eyes of the bathers. Although it doesnít lower the hardness levels or deal with the etching of the plaster, yet it is vital in making the pool water chemistry easier to manage. In addition to that, the use of this device will not add up to your maintenance as a magnetic water conditioner requires no electric or energy source to keep it on performing its tasks.
The magnetizer or magnetic water conditioner is a simple device that is essential if you want to keep your pool water clean and clear. Installing this new pool equipment wonít require you to hire a pool technician in order to get it set up in your pool. You can easily install this on your own just by following the manual. The magnetic water conditioner needs only to be attached or clamped around the pipes in your pool and works on its own without any need for a power source.
Another way of getting rid of these stubborn scale buildups is by addressing the problem through its source. This means that you need to lower the hardness of your water by using a water softener solution. There are many different products available in the market that can help you solve this problem conveniently without even resorting to other methods. Slowly pour the chemical solutions into the pool water for best result and donít forget to check the cyanuric acid level as well. You can also do both by lowering the calcium hardness while getting a magnetic water conditioner at the same time to get both advantages.
You can also use chlorine or bromine to improve the water condition of your swimming pool. However, in case you are dealing with very hard water, it would be better if you seek out for other pool systems that donít require the use of chemicals as they can greatly affect the water quality on your pool. Perhaps a saltwater chlorination system, ionization, an ozonator or natural chlorine tablets would work great miracles for you. After you corrected the water hardness level, make sure that you maintain this in order to prevent any more problems related to your pool water.